描述
The IC693CPU374 is a GE Fanuc Programmable Logic Controller (PLC) module from the 90-30 series. This module is a processor module that is used to host the user program, execute the logic and managed data exchanges to and from the processor via the embedded communication ports.
The IC693CPU374 may also be referred to as a controller. This controller has built-in microprocessor with embedded 586 processor with processing speed of 133 MHz. It has a typical scan rate of 0.15 miliseconds per 1K Boolean contact logic. This controller module has a single slot width that is installed to the 90-30 PLC rack.
The IC693CPU374 has a user memory of 240KB. It has Two (2) Ethernet communication ports that supports transmission speed of 10/100 Mbps with auto-sensing capability. These ports enable the controller to be connected to an Ethernet network for communication with programming workstations such as desktop or laptop computers, communication with Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems as well as other processors for messaging functions. This controller may also be communicated through the RS485 communication interfaces that can be found on the power supply whether standard or high-capacity power supply.
This controller accepts user program that is developed using a variety of programming software applications such as VersaPro 2.03 or later, CIMPLICITY Machine Edition Logic Developer 2.60 or later and Control software version 2.50 or later. When performing online edit to a controller with existing user program, utilize the same software with equal or higher version.
IC693CPU374是GE发那科可编程逻辑控制器(PLC)模块90-30系列。该模块是一个处理器模块，用于承载用户程序，通过嵌入式通信端口执行与处理器之间的逻辑和托管数据交换。
IC693CPU374也可以被称为控制器。该控制器内置微处理器和嵌入式586处理器，处理速度为133兆赫。它的典型扫描速率为每1K布尔接触逻辑0.15毫秒。该控制器模块有一个槽宽，安装到90-30 PLC机架上。
IC693CPU374的用户内存为240KB。它有两个(2)以太网通信端口，支持传输速度为10/100 Mbps，具有自适应能力。这些端口使控制器能够连接到以太网网络，与编程工作站(如桌面或笔记本电脑)通信，与人机界面(HMI)、监控和数据采集(SCADA)系统以及其他处理器通信，以实现消息传递功能。该控制器也可以通过可在电源上找到的RS485通信接口进行通信，无论是标准电源还是大容量电源。
该控制器接受使用各种编程软件开发的用户程序，如VersaPro 2.03或更高版本、CIMPLICITY Machine Edition Logic Developer 2.60或更高版本和Control软件2.50或更高版本。当使用已有的用户程序对控制器进行在线编辑时，请使用相同或更高版本的软件。
The IC693CPU374 is a GE Fanuc Programmable Logic Controller (PLC) module from the 90-30 series. This module is a processor module that is used to host the user program, execute the logic and managed data exchanges to and from the processor via the embedded communication ports.
The IC693CPU374 may also be referred to as a controller. This controller has built-in microprocessor with embedded 586 processor with processing speed of 133 MHz. It has a typical scan rate of 0.15 miliseconds per 1K Boolean contact logic. This controller module has a single slot width that is installed to the 90-30 PLC rack.
The IC693CPU374 has a user memory of 240KB. It has Two (2) Ethernet communication ports that supports transmission speed of 10/100 Mbps with auto-sensing capability. These ports enable the controller to be connected to an Ethernet network for communication with programming workstations such as desktop or laptop computers, communication with Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems as well as other processors for messaging functions. This controller may also be communicated through the RS485 communication interfaces that can be found on the power supply whether standard or high-capacity power supply.
This controller accepts user program that is developed using a variety of programming software applications such as VersaPro 2.03 or later, CIMPLICITY Machine Edition Logic Developer 2.60 or later and Control software version 2.50 or later. When performing online edit to a controller with existing user program, utilize the same software with equal or higher version.
